Home » Pressure Washing
Category Archives: Pressure Washing
Pressure Washing Tips For Beginners
When pressure washing, it’s essential to be aware of the angle of the spray and the psi rating. The psi rating will depend on the type of surface you’re cleaning, but universal color-coding will make your job easier. Blacktips, for instance, have a 65-degree angle, while white tips have a 40-degree angle. If you’re unsure of the hardness of the surface, start with the tip at the sharpest rise. Visit Website to learn more pressure washing tips.
If you’re new to pressure washing, you may be wondering how to clean various surfaces properly. Here are some tips to ensure you do an adequate job. First, don’t spray the same spot more than once. If you’re new to pressure washing, you may have to make several passes over a particular area before being happy with the results. Also, don’t start or stop spraying in the middle of a board, as this can cause visible lines. Instead, alternate strokes over the entire board, which prevents visible lines. When the wood is clean, seal it to prevent further damage from weather and water. If you can, do this one day before the pressure washing process.
When pressure washing new surfaces, start with a 40-degree nozzle. Make sure to move the wand quickly downward and keep it aimed toward a drain. Also, use an extension wand to reach high surfaces. This prevents the dirty water from splashing back up. Finally, don’t stay on a surface for too long because you can damage it without knowing it; if you damage it, back off and switch to a wider nozzle.
Next, choose the correct pressure washing tips for your type of surface. While a zero-degree spray is most suitable for general household cleaning, a yellow one is ideal for concrete surfaces. A white one produces a 40-degree angle, perfect for cleaning siding, patios, and outdoor furniture. Finally, the blacktip is the most gentle option and is excellent for wetting surfaces, like windows and siding. If you’re not sure which tip to use, take the time to experiment to find the right one for your surface.
When using a pressure washer, you should protect yourself by wearing safety gear. Safety goggles and gloves are recommended, as well as protective clothing. Never try to use the machine without proper protective equipment. Always wear eyeglasses, work gloves, protective clothing, and ear protection. Always remember to wear the appropriate gear, as a low-pressure stream of water can damage your eyes and skin. Always aim the spray away from people and animals. You should also keep your prize peony bush away from power lines.
When using pressure washers, use the proper nozzles for each application. The red nozzle will create a narrow jet of water. This nozzle will effectively remove deep stains on hard surfaces. A yellow nozzle will produce a narrow fan of water. This is an ideal nozzle for cleaning siding or outdoor furniture. The 25-degree nozzle is ideal for tackling concrete grime and rust. Use a black nozzle to remove stubborn stains.
If you are pressure washing vinyl siding, you should apply soap before starting the cleaning process. You should also check for any loose siding or cracks. If you notice any problem areas, you may need to patch them before beginning the pressure washing process. Next, attach a soaping nozzle to the wand. Fill the detergent reservoir with water to get the best results. After this, follow the manufacturer’s instructions. And then, you’re ready to clean your siding.
If you are pressure-washing a concrete surface, always use a spray tip that suits your cleaning feeling. Using the wrong pressure washer tip can ruin surfaces. Start with a white or wide-spray tip for your first time. Changing to a different tip later is also recommended. Lastly, try alternating between cleaning tips and cleaning a concrete surface. In the end, you’ll be glad you did.
Remember that lead paint is not compatible with pressure washing. Lead paint was banned in residential housing in 1978, but if you’re worried that your home has lead paint, you should get it tested before pressure washing. Contact your local health department for more information. It’s unsafe to pressure-wash lead-painted surfaces, so use a low-pressure washer and follow the manufacturer’s instructions. Also, always wear closed-toed shoes and gloves, as you don’t want to get harmed while cleaning your home.